User instructions
Yes! They are all available with prescription. If you have normal vision or just need decoration, choose 0.00 / Plano.
Consult your eye specialist to confirm the diopter count before purchasing.
Additionally, if you are under 18 years old, please use the contact lenses under the guidance of an expert.
How to choosethe degree correctoandhass stepwisewe are?
Cylinder range: from 0.00 to -3.00
Recommended grade = Sphere + Cylinder / 2
For example, if your Sphere (SPH) is -6.00 and your Cylinder (CYL) is -1.00, the best degree for you will be -6.50. If you cannot find the exact degree, choose one slightly less than the calculated result.
Cylinder beyond the previous range, still not available.
How to getthe Contact lenses?
Step 1: Gently take the lens out of the case after washing and drying your hands. (P.S.: Soak the contact lenses in the new contact lens solution for at least 6 hours before using them for the first time).
Step 2: Then, make sure to hold the correct side of the lens. If it takes on a perfect bowl shape with a perfectly straight edge, it is oriented correctly and ready to be placed in the eye. If the edge is noticeably curved outward (like a soup bowl), the lens is inside out and you need to turn it to the correct side.
Step 3: Use your free hand to lift your upper eyelid and lower the lower eyelid of the eye. Then use your index finger to gently place the lens.
Step 4: After placing the contact lens in its proper position, close your eyes for a while, and rotate your eyeball for adjustment.
Step 5: Do it again for the other eye through simple steps!
As take off thesspringscontact information?
Step 1: Wash and dry your hands completely before touching your eyes.
Step 2: Use your clean hand to lift your upper eyelid and lower the lower eyelid of the eye.
Step 3: With the pads of your index finger and thumb, gently pinch the contact lens to move it slightly down and remove it from the eye.
Step 4: Do it again for the other eye.
How to carethe contact lensesmixed?
Step 1: Clean
After removing the lens, place the contact lens in the palm of your hand and apply a small amount of cleaning solution to its surface.
Step 2: Rub
Rub each side of the contact lens with your fingertips for 30 seconds.
Step 3: Rinse
Rinse each side of the lens for 5 seconds to remove any lost debris.
Step 4: Disinfect
Place the contact lenses in your case and fill with cleaning solution. Let the lenses sit in the liquid for at least 4 hours.
Tipskindthat musts to know
1. Always use fresh solution to care for the lenses, and discard the liquid from the lens case after each use.
2. Remember to change the solution regularly if you do not use the contact lenses often
Rinse and clean the contact lenses every 2-3 days to effectively prevent protein buildup.
4. Keep contact lenses away from sharp objects because they are very thin and vulnerable.